RVs are a popular way to travel and are tons of fun, but emergencies can happen. If you’re locked out of your RV, it’s important to know how to open an RV emergency window from outside. These windows are designed to be easily opened from the inside, but what if you need to open them from the outside?
There are several ways to open an RV emergency window from outside. One option is to use a screwdriver or other tool to pry open the window. Another option is to activate the release mechanism and break the seal to open the window.
It’s important to be mindful of the distance between the window and the ground, as it can be significant. It’s best to put your legs in first and attempt to land on your feet to ensure safe entry.
We’ll go through how to safely open your RV emergency window from outside without causing damage to your rig.
[TABLE OF CONTENTS]
How To Open An RV Emergency Window from Outside
When it comes to RV safety, one of the most important things to know is how to open an RV emergency exit window from the outside. Here are the steps you need to follow:
Check All Other RV Windows And Doors
Before attempting to open the emergency window, make sure all other windows and doors are locked and secure. This will prevent any unwanted access to your RV.
Tools Required
You will need a Phillips head screwdriver to open the emergency window. If you don’t have one, make sure to purchase one before embarking on your next RV trip.
Locating the Emergency Window
The emergency window is typically located towards the back of the RV. Look for a small handle or lever near the bottom of the window frame.
Check If The Emergency Window Is Locked
Before attempting to open the emergency window, make sure it is not locked. If it is locked, you will need to unlock it using the key or lever provided.
Use A Phillips Head Screwdriver
Once the window is unlocked, use a Phillips head screwdriver to remove the screws that hold the outer frame of the window and window screen in place. Be careful not to damage the frame or the surrounding area.
Remove The Window Seal
After removing the screws, gently pry the outer frame away from the RV wall. This will expose the window seal. Use a sharp knife or other tool to carefully remove the seal and release the window pane. Be sure to do this slowly and carefully so as not to damage the window.
By following these steps, you can successfully open an RV emergency window from the outside. Remember to always prioritize safety and take precautions to prevent emergencies from happening in the first place.
Other Ways To Open Your RV Emergency Window From The Outside
If the emergency window release mechanism is not working, there are other ways to open your RV emergency window from the outside. However, it is important to note that these methods should only be used in emergency situations and should not be attempted unless absolutely necessary.
One option is to break the glass. This should be a last resort as it can be dangerous and may cause damage to your RV. If you do need to break the window, it is important to wear gloves and eye protection to avoid injury. You can use a hammer or other heavy object to break the glass. Aim for the corners of the window as they are typically the weakest points.
Another option is to use a glass cutter. This method requires a bit more skill and precision, but it can be a safer way to open the window without causing damage to your RV. To use a glass cutter, you will need to score the glass along the edges of the window and then apply pressure to break the glass along the score lines. Again, this should only be attempted in emergency situations.
If you are not comfortable breaking the glass or using a glass cutter, you can also call an RV locksmith. These professionals have the tools and expertise to safely open your RV emergency window from the outside without causing damage to your vehicle. Keep in mind that this is likely to be the most expensive option, so it should only be used if the other methods are not possible.
Check out our other helpful RV guides while you’re here:
